SG220XP0 Stainless Steel Open Thin Section Bearing Type X-Four-Point Contact
Dentification of thin section bearing SG220XP0
S：Material AISI440C Stainless Steel_no seals or shields
G：Series standard cross section_open bearings
220：Inch Size ( bearing bore 22.000 inch )
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_kaydon precision class 1 per ABEC 1F
Part number comparison
| KAYDON | FIJ |
| SG220XP0 | SG220XP0*FIJ |
Specifications of kaydon thin section bearing SG220XP0
| For Shaft Diameter | 22.000″ |
| Inner Diameter (d) | 22.000″ |
| Inner Diameter Tolerance | -0.0018″– 0″ |
| For Housing ID | 24.000″ |
| Outer Diameter (D) | 24.000″ |
| Outer Diameter Tolerance | -0.0018″– 0″ |
| Width (B) | 1″ |
| Width Tolerance | +.000 –.010″ |
| Bearing type | Four Point contact ball |
| Contact Angle | – |
| Seal Type | Open |
| Cross Section | 1″ x 1″ |
| Internal clearance | – |
| Operating temperature range | – |
| Radial dynamic load capacity | request by email |
| Radial static load capacity | – |
| Axial dynamic load capacity | request by email |
| Axial static load capacity | – |
| Bearing material | AISI 440C |
| Ring material | AISI 440C |
| Separator material | – |
| Separator type | – |
| Maximum rpm | – |
| Weight(lbs) | 17.300 |
