Team up with us,Are you ready to change your business? Find out more →

Track Rollers

FIJ BEARINGS > Products > Track Rollers > Track Rollers

Track rollers — stability in all positions

VIEW CATALOG

Versions of yoke type track rollers

Single row yoke type track rollers (LR2, LR6, LR60)
are similar to single row deep groove ball bearings and make possible higher speeds than double row yoke type track rollers. They are equipped with lip seals on both sides (2RS).
Double row yoke type track rollers (LR50, LR52, LR53)
are similar to double row angular ball bearings, are thus broader and have a higher load carrying capacity. They are either equipped with gap seals (ZZ) or lip seals (2RS) on both sides.
Double row track rollers with profiled outer ring (LFR, LV, W)
are similar to double row angular contact ball bearings, are thus broader and have a higher load carrying capacity. Are mostly used together with a shaft, a circular or an angular mating track. They are either equipped with gap seals (ZZ) or lip seals (2RS) on both sides.

Features of these series

The thick-walled outer ring with spherical or cylindrical outside surface profile (suffix X) usually rolls at a flat surface, a curve or a counter roller. The spherical design compensates slight skewing towards the raceway. Yoke type track rollers are similar to deep groove ball bearings or angular ball bearings regarding their structure, have a high radial load carrying capacity and also support axial forces in both directions.

Track rollers

Track rollers are based on ball bearings and can therefore absorb radial as well as axial loads. The outer ring is shaped so that it can roll on a counter roll, a curve or a plane. To compensate for misalignments, the outer ring is also available in crowned design.

Material description of yoke type track rollers

Yoke type track rollers made of rolling bearing steel
Withstand extremely high load-ratings and are suitable for temperatures from circa -10°C up to +120°C, in case of rubber seals up to +100°C in the long run. The steel is wear-resistant, shock-resistant, conductive and magnetic.

RESOURCE CENTER

Bearing Data

DATA TABLE

W4X Track Rollers Bearings

Bearing Data Track Rollers W Series 1660202842

Bearings Data Inner diameter Ø (mm): 15 Outer diameter Ø (mm): 59.94 Width (mm): 19.05 Bore Dia Tolerance-Ø (mm): 0/-0,0...

Continue →

W4 Track Rollers Bearings

Bearing Data Track Rollers W Series 1660202840

Bearings Data Inner diameter Ø (mm): 15 Outer diameter Ø (mm): 59.94 Width (mm): 19.05 Bore Dia Tolerance-Ø (mm): 0/-0,0...

Continue →

W3X Track Rollers Bearings

Bearing Data Track Rollers W Series 1660202839

Bearings Data Inner diameter Ø (mm): 12 Outer diameter Ø (mm): 45.72 Width (mm): 15.88 Bore Dia Tolerance-Ø (mm): 0/-0,0...

Continue →

W3 Track Rollers Bearings

Bearing Data Track Rollers W Series 1660202838

Bearings Data Inner diameter Ø (mm): 12 Outer diameter Ø (mm): 45.72 Width (mm): 15.88 Bore Dia Tolerance-Ø (mm): 0/-0,0...

Continue →

Applications

Read More
dental-instruments

Medical Instruments

From ultra-precise surgical instruments to high speed dental drill turbines, FIJ miniature bearings deliver the highest
Read More
electric-motors-pic-01

High Precision Motors

High precision motors are used throughout industry to provide smooth and quiet rotation. From robotic exoskeletons to in
Read More
water-pump-station

Vacuum Pumps

Operating in a high or ultra-vacuum environment presents a number of challenges for bearings, which are essential in ach
Read More
machine-tool-spindles-grinding-id-400-l-1

Machine Tool Spindles

In industry, it’s essential that machine accuracy is achieved and maintained to the highest degree. High speeds and load
Read More
Robotics_PICLARGE-1200x800

Robotics Industry

The field of robotics is becoming an increasingly sophisticated and rapidly developing area of innovation. From artifici
Read More
food-and-bev-crop

Food & Beverage Industry

Specifying a ball bearing for use in food and beverage production and packaging raises a unique set of considerations

Read More
IMG_20151218_151012

Flow Meters

It is essential that the flow of gases and liquids is accurately measured by turbine flow meters, where conditions ar

Read More
manufacturing-automation

Automation & Industry

Since the introduction of the Ford production line over 100 years ago, the manufacturing industry has embraced the co

Read More
industries-agriculture

Agriculture Industry

Uptime is critical as unplanned downtime that can ruin a planting or harvesting season. Whether it is dirt, debris, e

More Information

  • 1. ENGINEERING SUPPORT

    FIJ has at its disposal a range of state-of the art laboratory equipment and test rigs which are used for bearing analysis and testing…

  • 2. GUARANTEED TOP QUALITY

    Production is implemented on modern machinery subject to a corresponding quality control, Our proven customer satisfaction is for us the true certificate…

  • 3. WE KEEP THINGS MOVING

    Whatever requirements your production process may pose, we have the products you need. We have the versatility, speed and service to fill your orders…

NJ207ET2XCS42 Single row cylindrical roller bearing

NJ207ET2XCS42 Single row cylindrical roller bearing

NJ207ET2XCS42 Single row cylindrical roller bearings Inside Diameter:  35mm Outside Diameter:  72mm Width:  17mm Seals / Shielded:  None Cage:  Polyamide Cage NJ207ET2XCS42 bearings 35MM Bore; Straight Bore Profile; 72MM Outside Diameter; 17MM Width; Nylon Cage Material; RBEC 1 | ISO P0; Single Row; Inner Ring – One Side Separable; No Snap Ring; Relubricatable; CS42 Internal […]

Read more
GN207KRRB Eccentric Locking Collar Ball Bearings

GN207KRRB Eccentric Locking Collar Ball Bearings

GN207KRRB Eccentric Locking Collar Ball Bearings Description GN207KRRB INSERT BRG ; 2-7/16″ BORE IR WID 5.118″ OD 2-7/16″ Bore; Wide Inner Ring; Ball Bearing; 3-1/8″ Length Thru Bore; 1.299″ Outer Race Width; 5.118″ Outside Diameter; Relubricatable; Double Land Riding Rubber Contact Seal; Eccentric Collar Mounting Method Item Number GN207KRRB Category Bearings for Housings Weight and […]

Read more
LMK16 Flanged Linear Ball Bearing LMK 16

LMK16 Flanged Linear Ball Bearing LMK 16

LMK16 Flanged Linear Ball Bearing LMK 16 Inner Diameter: 16mm Outer Diameter: 28mm Length: 37mm Closure Type: Rubber Sealed Material: Chrome Steel SAE-52100 Lubrication: Light Oil Static Load: 2,579 lbf Dynamic Load: 1,698 lbf Country of Origin: China Interchange Numbers: LMK16UU, LMK16GUU, LK16UU, SMK16GUU, LHFR16, FTB16UU, NFED-16VUU LMK16 Flanged Linear Ball Bearing LMK 16 Basic […]

Read more
567/563 Tapered roller bearings 567 - 563

567/563 Tapered roller bearings 567 – 563

567/563 Tapered roller bearings 567 – 563 Information Model: 567 / 563 WEIGHT: 1.8000 KGS Berings Data INSIDE DIAMETER (INCH): 2.7/8 INCH OUTSIDE DIAMETER (INCH): 5 INCH WIDTH (INCH): 1.7/16 INCH CAGE TYPE: STEEL SEALS OR SHIELDS: OPEN TYPE DYNAMIC LOAD RATING (KN):196 STATIC LOAD RATING (KN): 262   567/563 Single row tapered roller bearing, […]

Read more
309726 Angular Contact Ball Bearing Double Row

309726 Angular Contact Ball Bearing Double Row

309726 Angular Contact Ball Bearings Double Row Bearing Number: 309726 Category:Angular Contact Ball Bearing Double Row Weight and Dimensions Inner (d) MM34 Outer (D) MM64 Width (B) MM37 Weight (kg)0.43 309726 Bearings Bore C – Cylindrical Bore Seal 2RS – Rubber Seal on Two Sides Cage Type S – Steel or Standard Cage External Modification […]

Read more
NP725688/NP560412 Radial taper roller bearings NP725688 - NP560412

NP725688/NP560412 Radial taper roller bearings NP725688 – NP560412

NP725688/NP560412 Radial taper roller bearings NP725688 – NP560412 dimensions NP725688 / NP560412 Main dimensions: d mm⁄inch D mm⁄inch T mm⁄inch B mm⁄inch Mass kg⁄lb ➁ 76.200 171.450 49.212 46.038 5.007 3 6 3⁄4 1 15⁄16 1 13⁄16 11.040 Tapered Roller Bearing; Single Row    

Read more
RAE 20 NPPB RAE20-NPP-B Radial insert ball bearing

RAE 20 NPPB RAE20-NPP-B Radial insert ball bearing

RAE 20 NPPB RAE20-NPP-B Radial insert ball bearings Weight and Dimensions Inner (d) MM 20 Outer (D) MM 47 Width (B) MM 31 Inner (d) Inch 0.7874 Outer (D) Inch 1.8504 Width (B) Inch 1.2205 Weight (kg) 0.18 Product Properties Seal 2F – Standard Seal for Y-bearings Lubrication Non-Regreaseable Special Treatment No Special Treatment  

Read more
R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ

R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ

R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ R 1340 HH Configured Specifications Type Ball Bearing Inner/Outer Ring Material 52100 Steel Bearing Style Double Shielded Outer Ring Shape Flat Precision Class 0 Inner Diameter d(Ø) 4 Outer Diameter D(Ø) 13 Width B(mm) 5 Specification Environment Standard Load Direction Radial Number of Raceway Ring Rows Single Row […]

Read more
3979/3920 Tapered Roller Bearings 3979 - 3920 Rolamento

3979/3920 Tapered Roller Bearings 3979 – 3920 Rolamento

3979/3920 Tapered Roller Bearings 3979 – 3920 Rolamento Dimensions Type Tapered Roller Bearing Bore Type Round Material Through Hardened Steel Style Cone & Cup Precision Rating Class 0 /Class 4 Cone Number 3979 Cup Number 3920 Configuration One Lubrication w/o Oil Hole Dimensions d – Bore 2 1/4 in57.150 mm D – Cup Outer Diameter […]

Read more
Load more
Our strengths for your success

Report for 2016 1.7 KB

Our Brochure 1.25 KB