Bearing Units

Type of housing

Plummer block bearing type P / SSP / PPL / PP: Ready for installation. With a long foot for a robust radial attachment with two screws. Ideal for drawn shafts with radial load-ratings.
Plummer block bearing type PA / PW: Ready for installation. Short foot for low profile applications. In the housing base integrated mounting holes allow a direct, space-saving screw with the adjacent construction from below. Ideal for drawn shafts with radial loads.
4 hole flanged housing unit type F / FPL / SSF: Easy installation. Ideal for radial load-ratings. Square design.
4 hole flanged housing unit type FC / PF: Easy installation. Ideal for radial load-ratings. Round design.
3 hole flanged housing unit type PF: Easy installation. Ideal for radial load-ratings. Round design.
3 hole flanged housing unit type PFT: Easy installation. Ideal for radial load-ratings. Triangular design.
2 hole flanged housing unit type FL / SSFL / FLPL / PFL: For radial load-ratings. Optimally suitable if the space at the operation site is limited.
Radial insert ball bearing housing unit type T: For radial load-ratings. Displaceable. With locating hole for tension bolt.

Bearing Units

Bearing units are two kind of: Ball bearing units and Roller bearing units.
Ball bearing units consist of an insert bearing mounted in a housing. An insert bearing is a deep groove ball bearing with a sphered (convex) outside surface and an extended inner ring that includes a mechanism to lock the unit onto the shaft. The housings have a correspondingly sphered but concave bore.
Roller bearing units (mounted bearing units) are robust, ready-to-mount bearing units that are assembled, lubricated and sealed at the factory for maximum service life.

Material description of housing units

Plastic housings with bearing inserts made of stainless steel: are extremely light, hygienic, economical, corrosion-resistant, damping, lubricated with grease for the food industry and are admissible for a temperature range from -20°C up to +90°C.
Stainless housings with bearing inserts made of stainless steel: are hygienic, corrosion-resistant, lubricated with grease for the food industry, have higher load-ratings and are admissible for a temperature range from -20°C up to +120°C.
Cast iron housings with bearing inserts made of rolling bearing steel: are extremely economical, withstand extremely high loads and are admissible for a temperature range from -10°C up to +120°C.
Miniature housings made of stainless steel or zinc die cast with bearing inserts made of stainless steel or rolling bearing steel: are temperature-resistant from -20°C up to +120°C.

RESOURCE CENTER

Bearing Data

PB22443H Solid-housed Pillow Blocks Link-Belt Spherical Roller Bearings

Bearing Units

PB22443H 2 11/16" Mounted Spherical Roller Bearing, Cast Iron 2-Bolt Pillow Block, Single Setscrew Locking Collar, Clearance Seal Retainer Type:S...

Continue →

FL207 Bearing Housing

Bearings Data Housing Type:Flange Housing Material:Cast Iron Number of Mounting Holes:2Mass: 0,7200 kgFlange Housing FL207

Continue →

FC204 Bearing Housing

Bearing Data Bearing Units Housing Bearings

Bearings Data Housing Type:Flange Housing Material:Cast Iron Number of Mounting Holes:4Mass: 0,6200 kgFlange Housing FC204

Continue →

F204 Bearing Housing

Bearing Data Bearing Units Housing Bearings

Bearings Data Housing Type:Flange Housing Material:Cast Iron Number of Mounting Holes:4Mass: 0,4700 kgFlange Housing F204

Continue →

Applications

Medical Instruments

From ultra-precise surgical instruments to high speed dental drill turbines, FIJ miniature bearings deliver the highest

High Precision Motors

High precision motors are used throughout industry to provide smooth and quiet rotation. From robotic exoskeletons to in

Vacuum Pumps

Operating in a high or ultra-vacuum environment presents a number of challenges for bearings, which are essential in ach

Machine Tool Spindles

In industry, it’s essential that machine accuracy is achieved and maintained to the highest degree. High speeds and load

Robotics Industry

The field of robotics is becoming an increasingly sophisticated and rapidly developing area of innovation. From artifici

Food & Beverage Industry

Specifying a ball bearing for use in food and beverage production and packaging raises a unique set of considerations

Flow Meters

It is essential that the flow of gases and liquids is accurately measured by turbine flow meters, where conditions ar

Automation & Industry

Since the introduction of the Ford production line over 100 years ago, the manufacturing industry has embraced the co

Agriculture Industry

Uptime is critical as unplanned downtime that can ruin a planting or harvesting season. Whether it is dirt, debris, e

More Information

1. ENGINEERING SUPPORT
FIJ has at its disposal a range of state-of the art laboratory equipment and test rigs which are used for bearing analysis and testing…
2. GUARANTEED TOP QUALITY
Production is implemented on modern machinery subject to a corresponding quality control, Our proven customer satisfaction is for us the true certificate…
3. WE KEEP THINGS MOVING
Whatever requirements your production process may pose, we have the products you need. We have the versatility, speed and service to fill your orders…

NJ207ET2XCS42 Single row cylindrical roller bearing

NJ207ET2XCS42 Single row cylindrical roller bearings Inside Diameter: 35mm Outside Diameter: 72mm Width: 17mm Seals / Shielded: None Cage: Polyamide Cage NJ207ET2XCS42 bearings 35MM Bore; Straight Bore Profile; 72MM Outside Diameter; 17MM Width; Nylon Cage Material; RBEC 1 | ISO P0; Single Row; Inner Ring – One Side Separable; No Snap Ring; Relubricatable; CS42 Internal […]

GN207KRRB Eccentric Locking Collar Ball Bearings

GN207KRRB Eccentric Locking Collar Ball Bearings Description GN207KRRB INSERT BRG ; 2-7/16″ BORE IR WID 5.118″ OD 2-7/16″ Bore; Wide Inner Ring; Ball Bearing; 3-1/8″ Length Thru Bore; 1.299″ Outer Race Width; 5.118″ Outside Diameter; Relubricatable; Double Land Riding Rubber Contact Seal; Eccentric Collar Mounting Method Item Number GN207KRRB Category Bearings for Housings Weight and […]

LMK16 Flanged Linear Ball Bearing LMK 16

LMK16 Flanged Linear Ball Bearing LMK 16 Inner Diameter: 16mm Outer Diameter: 28mm Length: 37mm Closure Type: Rubber Sealed Material: Chrome Steel SAE-52100 Lubrication: Light Oil Static Load: 2,579 lbf Dynamic Load: 1,698 lbf Country of Origin: China Interchange Numbers: LMK16UU, LMK16GUU, LK16UU, SMK16GUU, LHFR16, FTB16UU, NFED-16VUU LMK16 Flanged Linear Ball Bearing LMK 16 Basic […]

567/563 Tapered roller bearings 567 – 563

567/563 Tapered roller bearings 567 – 563 Information Model: 567 / 563 WEIGHT: 1.8000 KGS Berings Data INSIDE DIAMETER (INCH): 2.7/8 INCH OUTSIDE DIAMETER (INCH): 5 INCH WIDTH (INCH): 1.7/16 INCH CAGE TYPE: STEEL SEALS OR SHIELDS: OPEN TYPE DYNAMIC LOAD RATING (KN):196 STATIC LOAD RATING (KN): 262 567/563 Single row tapered roller bearing, […]

309726 Angular Contact Ball Bearing Double Row

309726 Angular Contact Ball Bearings Double Row Bearing Number: 309726 Category:Angular Contact Ball Bearing Double Row Weight and Dimensions Inner (d) MM34 Outer (D) MM64 Width (B) MM37 Weight (kg)0.43 309726 Bearings Bore C – Cylindrical Bore Seal 2RS – Rubber Seal on Two Sides Cage Type S – Steel or Standard Cage External Modification […]

NP725688/NP560412 Radial taper roller bearings NP725688 – NP560412

NP725688/NP560412 Radial taper roller bearings NP725688 – NP560412 dimensions NP725688 / NP560412 Main dimensions: d mm⁄inch D mm⁄inch T mm⁄inch B mm⁄inch Mass kg⁄lb ➁ 76.200 171.450 49.212 46.038 5.007 3 6 3⁄4 1 15⁄16 1 13⁄16 11.040 Tapered Roller Bearing; Single Row

RAE 20 NPPB RAE20-NPP-B Radial insert ball bearing

RAE 20 NPPB RAE20-NPP-B Radial insert ball bearings Weight and Dimensions Inner (d) MM 20 Outer (D) MM 47 Width (B) MM 31 Inner (d) Inch 0.7874 Outer (D) Inch 1.8504 Width (B) Inch 1.2205 Weight (kg) 0.18 Product Properties Seal 2F – Standard Seal for Y-bearings Lubrication Non-Regreaseable Special Treatment No Special Treatment

R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ

R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ R 1340 HH Configured Specifications Type Ball Bearing Inner/Outer Ring Material 52100 Steel Bearing Style Double Shielded Outer Ring Shape Flat Precision Class 0 Inner Diameter d(Ø) 4 Outer Diameter D(Ø) 13 Width B(mm) 5 Specification Environment Standard Load Direction Radial Number of Raceway Ring Rows Single Row […]

3979/3920 Tapered Roller Bearings 3979 – 3920 Rolamento

3979/3920 Tapered Roller Bearings 3979 – 3920 Rolamento Dimensions Type Tapered Roller Bearing Bore Type Round Material Through Hardened Steel Style Cone & Cup Precision Rating Class 0 /Class 4 Cone Number 3979 Cup Number 3920 Configuration One Lubrication w/o Oil Hole Dimensions d – Bore 2 1/4 in57.150 mm D – Cup Outer Diameter […]

Our Products

Type of housing

Material description of housing units

RESOURCE CENTER

Bearing Data

DATA TABLE

PB22443H Solid-housed Pillow Blocks Link-Belt Spherical Roller Bearings

FL207 Bearing Housing

FC204 Bearing Housing

F204 Bearing Housing

Applications

Medical Instruments

High Precision Motors

Vacuum Pumps

Machine Tool Spindles

Robotics Industry

Food & Beverage Industry

Flow Meters

Automation & Industry

Agriculture Industry

More Information

1. ENGINEERING SUPPORT

2. GUARANTEED TOP QUALITY

3. WE KEEP THINGS MOVING

NJ207ET2XCS42 Single row cylindrical roller bearing

GN207KRRB Eccentric Locking Collar Ball Bearings

LMK16 Flanged Linear Ball Bearing LMK 16

567/563 Tapered roller bearings 567 – 563

309726 Angular Contact Ball Bearing Double Row

NP725688/NP560412 Radial taper roller bearings NP725688 – NP560412

RAE 20 NPPB RAE20-NPP-B Radial insert ball bearing

R-1340HH Deep Groove Ball Bearings Dimensions 624ZZ

3979/3920 Tapered Roller Bearings 3979 – 3920 Rolamento