KD075XP0 Open Thin Section Bearing Type X- Four-Point Contact
Dentification of thin section bearing KD075XP0
K：Material AISI52100_no seals or shields
D：Series standard cross section_open bearings
075：Inch Size ( bearing bore 7.500 inch )
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_kaydon precision class 1 per ABEC 1F
Part number comparison
| KAYDON | FIJ | INA | NSK | SSB | SILVER |
| KD075XP0 | KD075XP0*FIJ | CSXD075 | – | RD075XP0 | SD075XP0 |
Specifications of thin section bearing KD075XP0
| Inner Diameter (d) | 7.500″ |
| Inner Diameter Tolerance | -0.0012″– 0″ |
| For Housing ID | 8.500″ |
| Outer Diameter (D) | 8.500″ |
| Outer Diameter Tolerance | -0.0012″– 0″ |
| Width (B) | 0.5000″ |
| Width Tolerance | +.000 –.005″ |
| Bearing type | Four Point contact ball |
| Contact Angle | – |
| Seal Type | Open |
| Cross Section | 1/2″ x 1/2″ |
| Weight(lbs) | 1.410 |
| Internal clearance | C0 |
| Operating temperature range | -65 to +250 °F |
| Radial dynamic load capacity | 6323 lbf |
| Radial static load capacity | 9310 lbf |
| Axial dynamic load capacity | 10930 lbf |
| Axial static load capacity | 23280 lbf |
| Bearing material | AISI 52100 |
| Ring material | AISI 52100 |
| Separator material | Brass/Composite |
| Separator type | Circular Pocket |
| Maximum rpm | 1500 rpm |
| Bearings designation | Request by email |
