KB120XP0 Open Thin Section Bearing Type X- Four-Point Contact
Dentification of thin section bearing KB120XP0
K：Material AISI52100_no seals or shields
B：Series standard cross section_open bearings
120：Inch Size ( bearing bore 12.000 inch )
X: Bearing Type_four point contact
P: Separator_standard one piece formed ring with snap over pockets
0: Precision_kaydon precision class 1 per ABEC 1F
Part number comparison
| KAYDON | FIJ | INA | NSK | SSB | SILVER |
| KB120XP0 | KB120XP0*FIJ | CSXB120 | – | RB120XP0 | SB120XP0 |
Specifications of thin section bearing KB120XP0
| For Shaft Diameter | 0.000″ |
| Inner Diameter (d) | 12.000″ |
| Inner Diameter Tolerance | -0.0012″– 0″ |
| For Housing ID | 12.625″ |
| Outer Diameter (D) | 12.625″ |
| Outer Diameter Tolerance | -0.0012″– 0″ |
| Width (B) | 0.8300″ |
| Width Tolerance | +.000 –.010″ |
| Bearing type | Four Point contact ball |
| Contact Angle | – |
| Seal Type | Open |
| Cross Section | 5/16″ x 5/16″ |
| Internal clearance | – |
| Operating temperature range | – |
| Radial dynamic load capacity | request by email |
| Radial static load capacity | – |
| Axial dynamic load capacity | request by email |
| Axial static load capacity | – |
| Bearing material | – |
| Ring material | – |
| Separator material | – |
| Separator type | – |
| Maximum rpm | – |
| Bearings designation | – |
