NC050XP0 Thin Section Bearings Type X-Four-Point Contact
NC050XP0 Thin Section Bearings Type X-Four-Point Contact
News
Part number comparison
| KAYDON | FIJ |
| NC050XP0 | NC050XP0*FIJ |
Specifications of thin section bearing NC050XP0
| For Shaft Diameter | 4.9998″ |
| Inner Diameter (d) | 4.9998″ |
| Inner Diameter Tolerance | -0.0010″– 0″ |
| For Housing ID | 5.7503″ |
| Outer Diameter (D) | 5.7503″ |
| Outer Diameter Tolerance | -0.0008″– 0″ |
| Width (B) | 0.3750″ |
| Width Tolerance | +.000 –.005″ |
| Bearing type | Four Point contact ball |
| Seal Type | Open |
| Cross Section | 3/8″ x 3/8″ |
| Weight(lbs) | 0.580 |
| Internal clearance | – |
| Operating temperature range | – |
| Radial dynamic load capacity | request by email |
| Radial static load capacity | – |
| Axial dynamic load capacity | request by email |
| Axial static load capacity | – |
| Bearing material | AISI 52100 |
| Ring material | AISI 52100 |
| Separator material | – |
| Separator type | – |
| Maximum rpm | – |
| Bearings designation | – |
