SAA17AG0 Stainless Steel Open Thin Section Bearing Type A-Angular Contact
Dentification of thin section bearing SAA17AG0
S：Material AISI 440C Steel_no seals or shields
AA：Series standard cross section_open bearings
17：Inch Size ( bearing bore 1.7 inch )
A: Bearing Type_angular contact single row bearing
G: Separator_nylon one piece molded ring with circular pockets
0: Precision_kaydon precision class 1 per ABEC 1F
Part number comparison
| KAYDON | FIJ |
| SAA17AG0 | SAA17AG0*FIJ |
Specifications of kaydon thin section bearing SAA17AG0
| For Shaft Diameter | 1.750″ |
| Inner Diameter (d) | 1.750″ |
| Inner Diameter Tolerance | -0.0006″ – 0″ |
| For Housing ID | 2.125″ |
| Outer Diameter (D) | 2.125″ |
| Outer Diameter Tolerance | -0.0005″ – 0″ |
| Width (B) | 0.1875″ |
| Width Tolerance | +.000 –.005″ |
| Bearing type | Angular contact ball |
| Contact Angle | 30° |
| Seal Type | Open |
| Cross Section | 3/16″ x 3/16″ |
| Internal clearance | – |
| Operating temperature range | – |
| Radial dynamic load capacity | request by email |
| Radial static load capacity | – |
| Axial dynamic load capacity | request by email |
| Axial static load capacity | – |
| Bearing material | AISI 440C |
| Ring material | AISI 440C |
| Separator material | – |
| Separator type | – |
| Maximum rpm | – |
| Weight(lbs) | 0.045 |
