UGAK201-8

The UGAK201-8 is an inch-series ball bearing pillow block from the UGAK200 series, built around a cast iron housing that provides the rigidity and dimensional stability demanded by heavy-load, high-vibration service. Its wide inner ring carries a double seal, and shaft retention relies on eccentric collar locking, which clamps firmly when rotated in the direction of shaft rotation and the locking screw is fully tightened. The unit has a 0.5" bore, a center height of 0.375 inch, and a 1/4-28 UNF lubrication fitting tap, accepting two 0.375 inch mounting bolts.