T-114-45

The T-114-45 is an inch-series thrust ball bearing with an inside band, built to carry thrust loads in one direction. Its construction uses 20 balls running between hardened washers, with the inside band locating the shaft-side washer. The bore measures 2.438" (+0.001" to +0.003"), the small outer diameter 3.938" (0" to -0.015"), the large outer diameter 3.906" (-0.003" to +0.003"), and the height 1.25". Bearings of this style are typically used where axial loads must be supported at moderate speeds, such as in gearboxes, crane hooks, and vertical shaft assemblies.