MKSP10
The MKSP10 is an inch-series airframe control ball bearing within the KSP/MKSP family, built for the precise, load-bearing joints found in aircraft flight-control mechanisms. Its construction pairs an inner ring with a 0.625" bore and 0.813" inner width against an outer ring measuring 1.9375" in diameter and 0.625" wide, with tight tolerances held on bore, outer diameter, and both ring widths. A ball complement of fourteen balls, each 0.2813" in diameter, completes the assembly. Bearings of this type are typically used in airframe control linkages and similar pivot applications.