KHLLP201-8
The KHLLP201-8 is an inch-series mounted pillow block ball bearing from the KHLLP200 product series, built with a narrow inner ring and double-sealed construction. Its eccentric collar locking secures the shaft by rotating the collar in the direction of shaft rotation and fully tightening the locking screw, holding reliably under moderate loads and intermittent vibration without damaging the shaft surface. The unit fastens to the mounting surface with two 0.375 inch bolts, a widely used light-to-medium duty hole pattern that supports drop-in replacement. Bore diameter is 0.5 inch, with tolerance of -0.0005" to 0".