MDSP6

The MDSP6 is an inch-series airframe control ball bearing from the DSP/MDSP family, built for the demanding loads and motions of aircraft flight-control systems. Its construction pairs an inner ring with a 0.375-inch bore and a 1.4375-inch outer diameter, held to tolerances of -0.0010 to 0 inch on both. The outer ring is 0.75 inch wide and the inner ring 0.937 inch wide, each toleranced from -0.005 to 0 inch, and the complement of 28 balls measuring 0.2188 inch in diameter carries the load. Bearings like this are typically used in airframe control linkages and similar mechanisms where precise, reliable articulation is required.