KP4
The KP4 is an inch-series airframe control ball bearing built to Standard Reference MS27640-4, part of the KP/MKP family. It has a 0.25-inch bore with a -0.0005" to 0" tolerance, a 0.9014-inch outer diameter held to -0.0005" to 0", and an outer ring width of 0.335" (-0.005" to 0") against an inner ring width of 0.484" (-0.005" to 0"). Its ball complement numbers 11. Such airframe control ball bearings are typically used in aircraft control linkages and similar mechanisms where precise, closely toleranced movement is required.