KHLLP202-10

The KHLLP202-10 is an inch-series pillow block ball bearing from the KHLLP200 product series, built with a narrow inner ring and double-sealed construction. Its eccentric collar locking secures the shaft by rotating an offset collar in the direction of shaft rotation until it clamps firmly, tightening the locking screw fully, which protects the shaft surface while distributing load over a broader contact area. Two 0.375 inch bolts fasten the unit to the mounting surface, a widely used hole pattern in light-to-medium duty pillow blocks, supporting both new installations and drop-in replacements. The 0.625 inch bore suits shafts requiring reliable retention under moderate loads and intermittent vibration.