HT10-60N1Z

The HT10-60N1Z is an inch-series four point contact ball slewing ring from the HT Series, built with an internal gear and a standard bearing style. Its inner and outer rings engage the steel balls at four contact points, so the bearing carries radial, axial, and tilting loads at once. The inner ring measures 54.16" inside diameter, the outer ring 66" outside diameter, and the overall assembly stands 3.5" high, with inner and outer rings each 3" tall and a 57.25" inner-ring bolt circle. This arrangement delivers high load capacity, durability, and smooth, low-friction rotation for cranes, excavators, solar trackers, wind turbines, radar and antenna systems, and offshore marine equipment.