GDW5

The GDW5 is an inch-series airframe control ball bearing built to Standard Reference MS27647-G-4AG-5G, part of the GDW K GDW family. Its construction pairs an inner ring with a 0.3125-inch bore and 0.938-inch inner width with an outer ring measuring 0.875 inches in diameter and 0.813 inches wide, held to tight tolerances on bore, outer diameter, and both widths, and running on a 26-ball complement. Bearings of this type are typically used in airframe control linkages and similar aircraft mechanisms where precise, compact ball bearing support is required.