CNYR-64
The CNYR-64 is a special cam follower in the inch measurement system, built with a crowned outer diameter of 2 inches and a roller width of 1.25 inches. Its 0.625-inch bore and 1.3125-inch overall width suit mounting on a recommended 0.6247-inch shaft, while the 1/8-inch oil hole supports lubrication and the 1.2031-inch minimum boss diameter guides installation. Rated for radial loads with a 0.928 load factor, this crowned cam follower is typically used in track, guide, and cam-driven applications where slight misalignment is expected.