T-114RG-1002
The T-114RG-1002 is an inch-measure thrust ball bearing with a center rivet, built to carry thrust loads in one direction. Its construction uses six balls of 0.344" diameter, retained by the center rivet, with a small outer diameter of 1.125" held to a tolerance of 0" to -0.015", a large outer diameter of 1.109" held to 0" to -0.003", and a height of 0.875" within -0.005" to +0.005". Bearings of this style are typically used where axial loads must be supported with minimal friction, such as in turntables, swivel mechanisms, and similar thrust-loaded assemblies.