RK6-25E1Z

The RK6-25E1Z is a flanged four point contact ball slewing ring from the RK Series, built with external gear teeth in an inch measurement system. Its inner and outer rings make four-point contact with the steel balls, so the bearing carries radial, axial, and tilting loads together while rotating smoothly. The inner ring measures 21.03" inside diameter and 25.2" externally; the outer ring is 29.15" outside diameter with a 25.28" internal diameter. Overall assembly height is 2.205", and the inner ring stands 1.811" tall. Typical uses include cranes, excavators, solar trackers, wind turbines, radar and antenna systems, and marine equipment.